ICORP-IFOAM Specialty Products Corporation • PO Box 470036, Sanford, FL 32747
HOW IT WORKS:
Reducing future wood pole rot, significantly improves system reliability, providing cost-effective,
extended maintenance free operation and increases the asset value. Wood poles naturally have cracks in their surface that can extend 30 to 40 mm. These voids allow water to gather and, over time, will cause decay to form
in the pole top.
Using IPOLE Pole Putty, a perminant flexible cap is formed on the pole top. This unique product has a slow release formula, deters birds and stops decay as it contains a proven ingredient to rejuvenate the preservative.
Capping Putty may be applied either in the field while the pole is in service or in the horizontal position while the poles
are on the pole pile. The finished product flexible, and weather resistant.
Cure time is approx. 1 hr.
Total installation time- 5 to 10 minutes
IP-CAP-010 Wood Pole Capping Putty
10 fl. oz. Caulk Tube, Brown, Asphalt-Enhanced Modified Polymer pole capping putty, one per pole top.
IP-CAP-025 Wood Pole Capping Putty
Quart Kit, Black, Sniff’n'Stop® Enhanced Asphalt Modified Polymer pole capping putty, contains 3″ plastic putty knife, Approx. coverage: 6.5 sq. ft. (flat surface).
IP-CAP-50 Wood Pole Capping Kit
for pole tops to 8″ diameter (Distribution size poles)
kit contains IFOAM, 2-part IPAK, with brown canvas bonnet.
IP-CAP-100 Wood Pole Capping Kit
for pole tops to 12″ diameter (Distribution size poles)
kit contains IFOAM, 2-part IPAK, with Brown canvas bonnet.
Wood Pole Capping Putty
CAPPING PUTTY INSTRUCTIONS
Copyright 2017. All rights reserved.